Barracuda Standard Swimming Goggles

The Standard is the original BARRACUDA swim goggle, recognized worldwide with its round design. Most goggles create suction to make the goggle fit, but Barracuda brought positive pressure fit to the market.

The Standard uses BARRACUDA's patented "Positive Pressure" frame, which matches the facial bone structure. In addition, the soft closed-cell foam will further enhance the goggle's fit.

The frame matches the anatomy of the face, and the foam cells close down to provide the wearer with a truly personal, leak-free, PAIN-FREE fit. Designed for fitness swimmers, the Standard is large and comfortable. Large lenses provide a clear visual field. The lenses are not treated with an anti-fog coating. A sample bottle of Barracuda defogger is included, and refill bottles are available here in our store.

When trying a barracuda goggle for the first time, one must understand these are pressure goggles versus a suction goggle.

• Goggle Strap Position: Adjust the goggle strap to be worn at a 45-degree angle above the ball of the back of your head. This positioning tilts the goggle in and up within the eye socket.
• Strap Placement: Ensure the strap is split over the back ball of the head for a secure fit.
• Strap Tension: Tighten the straps very, very securely to maintain the desired fit.
• Nose Piece Adjustment: Customize the nose pieces according to your comfort and fit requirements. Use the small end of the hex key and turn counterclockwise to loosen the screw. Please be mindful not to catch the foam with the wrench.
• Memory Foam Adaptation: Please note that Barracuda goggles feature memory foam, and it may take some time and wear to adapt to the unique contours of your eyes.
• Defogger Use: Apply one drop of defogger to the inside of each lens. Gently spread it around and lightly wipe away any excess. Avoid excessive wiping, as this will remove the defogger. Apply once before swimming for best results.
  

Fit & Adjustment Information

• 3M Foam Padding: Pre-applied during manufacturing. If the foam sticks to the inner packaging during unpacking, simply press it back into place by hand. This is normal and not a defect.
• Adjustment Care: When tightening the nose bridge set screws, keep the Allen wrench clear of the foam to avoid damage.
• Fit Matters: Improper adjustment or loose screws may cause leaks or fogging and are related to fit, not product failure.
• Models: Applies to Classic, B300, and Medalist models.